Return to Site
Warehouse Locations Renew Membership Join Costco Customer Service
Click here for warehouse coupons
Order by Item Number Order Status My Account Sign In or Register

Video: Englewood Adjustable Set Up Procedures

Video Gallery
Close Top

Englewood Adjustable Set Up Procedures

Length: 1:41 Added: Nov-8 Views: 75

Video featuring products available on Costco.com.

50%
EN ES FR

Video featuring products available on Costco.com.

Before assembling the Inglewood Adjustable Base, verify that you have all the components by cross-checking the list of contents. Inspect the components for possible damage. Uncoil the main power cord and extend it out of the head end of the base. Remove the hardware box from the shipping container and cut the zip tie to remove the mattress retainer. Install the four legs into the base frame. You can either use the 3-inch legs or the pin adjustable legs. To install, simply screw each leg into a tapped hole at the corner of the base frame. For the pin adjustable legs, push the pin in to adjust the leg height. You can achieve a height of 6 to 10 inches. Keep the base in the carton and rotate the entire bottom carton on its edge, then gently rotate it over so the base is resting on its legs. Remove the shipping carton and plastic packaging from the base. Plug the base in, then install two AAA batteries into the remote. Use the remote to activate the functions of the base to make sure they work properly. If the base does not operate refer to the Troubleshooting Section of the Owner's Manual. Return the base to the level position. Install the mattress retainer by placing the retainer ends into the grommeted holes at the foot of the base. Press down until the horizontal retainer section is flush against the base. Place a mattress on the adjustable base. Basic installation is now complete.