Return to Site
Warehouse Locations Renew Membership Join Costco Customer Service
Click here for warehouse coupons
Order by Item Number Order Status My Account Sign In or Register

Video: Kanto 40" - 90" Full Motion Articulating Mount FMX3

Video Gallery
Close Top

Kanto 40" - 90" Full Motion Articulating Mount FMX3

Length: 3:47 Added: Jul-23 Views: 5166

The Kanto full motion FMX3 is a very versatile articulating mount for 40' to 90' flat panel TVs.


The Kanto full motion FMX3 is a very versatile articulating mount for 40' to 90' flat panel TVs.

[MUSIC PLAYING] Kanto's FMX3 Full Motion TV Mount is perfect for hanging your flat panel TV, and will support TVs up to 150 pounds. The wide wall plate accommodates 16-inch and 24-inch stud centers. When fully extended, the FMX3 pulls out an incredible 28 inches from the wall, allows you to tilt your TV forward and back, and heavy duty wishbone arms allow up to 80-degree pan. Easily move your TV into the best viewing position for your room. Fully compressed, it's only 4 inches from the wall. Your Kanto mount contains a labeled hardware kit and an instruction manual to make installation simple. You will also need some additional tools. Please refer to the manual for a list of tools you'll need for installation. If you have any questions about installation or parts, please contact us at 1-888-848-2643. Begin by building the H assembly using the components in the box. Unscrew the locking screws at the end of each arm of the H assembly and set them aside. Slide the TV bracket arms onto the H assembly and replace the locking screws. Don't fully tighten the TV bracket screws yet. Now attach the H assembly to your TV. Do not let your TV face down on the screen to do this. If there is a stand that came with your TV, you can use this temporarily to hold the TV in position. Take a screw, lock washer, and square washer, and with the help of an assistant, mount the H assembly onto the back of the TV. You can shift the TV horizontally and vertically at this stage. Do not overtighten the screws into the back of the TV. Now fully tighten the TV bracket screws. Using a stud finder, locate the center of the first stud and make a small mark, then locate the center of the adjacent stud and make another mark. After marking centers of each stud, make sure they are level. Included in the box is paper template to help you mark the placement of the mount. Place the template over the two level marks and tape it to the wall temporarily. Now using the template as a guide, mark out the other holes. Use your marks to drill pilot holes into the studs. The bottom of the template has a pouch, which will catch the drill dust. Thread the supplied washers onto each of the six lag bolts. The wall plate is heavy, so have an assistant hold it in position while you insert these lag bolts into the wall. Insert and tighten the lag bolts until snug. Insert the top two mount screws and washers into the H assembly. Screw them in halfway, as they will be hooked onto the TV tilt head plate. Make sure the washers on the H assembly are pulled away from the plate before mounting the TV. With the help of an assistant, lift the TV and mount it onto the tilt head plate. Tighten the top mount screws and lock them into position using the Allen key provided, then insert the bottom two mount screws and secure them as well. The arms of FMX3 have a cable management system that can be moved as required. Thread your cables through the cable routing system to keep your installation tidy. We hope you will enjoy using your Kanto Mount for many years to come. To learn more about our other products, please visit our website at