572956 M200 Articulating Mount
572956 M200 Articulating Mount
[MUSIC PLAYING] This video will demonstrate the installation of an M200 by Kanto AV Systems, a full-motion mount for TVs up to 42 inches. Using a stud finder, locate the center of the stud. Using a level, make a mark that is vertical with the top mark. Using the mount as a template, mark on the vertical line the location of the bottom hole. Drill both pilot holes into the stud. Use the leg bolts to attach the mount to the wall. Snap the decorative cover onto the mount's wall plate. Using the screws provided, attach the mount plate to the back of the TV. For TVs requiring a large hole spacing, digital extensions are supplied. Using two people, lift and attach the TV to the mount head plate. Add the final two mount screws and tighten. Tilting is achieved using the tilt arms, easily accessible behind the TV. A rotation adjustment is available should you need it. This pre-assembled mount allows your TV to extend 20 inches from the wall, offering a wide range of viewing positions.